• Fit two pedal hubs onto the pedal axle metal tabs. Make
sure the metal tabs fit into the slot in each pedal axle cover.
Pedal Hub
Pedal Hub
Pedal Axle
Metal Tab
Metal Tab
Slot
• While holding the pedal hubs on the pedal axle, insert the
pedal axle into the hole in the center of the front wheel.
Hole
Pedal Axle
Pedal Hubs
Front Wheel
• Push the pedal hubs into the center of the front wheel until
they are flush with the surface of the front wheel.
Pedal Hubs
5
6
7
4
• Turn the frame on its side with the exposed end of the
straight axle up.
• Place the assembled rear wheel on the scrap block of wood.
• Slide a washer onto the straight axle.
• Slide a rear wheel (indented side up) onto the end of the
straight axle.
• Slide a hubcap (peg side down) onto the straight axle.
• Fit a cap nut on the end of the straight axle.
• Tap the cap nut with a hammer. Gently pull the rear wheel
up to be sure the cap nut is securely attached to the
straight axle.
• Set the frame assembly aside.
Cap Nut
Indented
Side Up
Assembled Rear
Wheel
Straight Axle
Rear Wheel
Washer
Assembly
Hubcap
Frame
4
Bottom View
Scrap Block
of Wood
