6
• Turn the frame upright.
• Insert the fork post up through the hole in the neck of the
frame. Make sure the fork is positioned so that the fork
covers face the rear wheels.
• Place the handlebar over the fork post and push it down
onto the frame. Make sure the handlebar is positioned so
that the screw hole faces the rear wheels and aligns with
the screw hole in the fork post.
Helpful Hint: You may need to rotate the handlebar to align
the holes.
• Insert the #8 x 3" screw into the hole and tighten with a
Phillips screwdriver. Do not over-tighten.
Handlebar
Frame Neck
Fork Post
Fork Cover
#8 x 3" Screw – 1
SHOWN ACTUAL SIZE
• At an angle, insert one peg on the back of the seat into the
hole in the rear of the frame.
• Insert and snap the other peg on the back of the seat into
the other hole in the rear of the frame.
One-time assembly is now complete.
Seat
Holes
Pegs
Assembly
13
14
