9
T8396pr-0920
ASSEMBLY
BOTTOM VIEW
SIDE VIEW
4
5
• Wipe the steering column with a paper towel to
remove any excess lubricant.
• Turn the vehicle on its side.
• Insert the straight end of the steering column up
through the hole in the vehicle frame and the vehicle
floor and out through the hole in the dash.
• While holding the steering column in place, turn the
vehicle upright.
Steering
Column
Hole
• Position the steering wheel so that the large opening
and the tab on the steering wheel stem are
both UP
.
• Fit the steering wheel onto the steering column.
Steering
Wheel
Steering
Column
Tab UP
Large Opening UP
• Insert the
5
/
32
" x 1
1
/
2
" pin through the hole in the end of
the steering column.
• Lower the steering column so that the pin fits inside
the center of the steering wheel.
End of
Steering
Column
5
/
32
" x 1
1
/
2
" Pin
6
7
• Fit the steering wheel cap into the center of the
steering wheel.
• Insert two #10 x
3
/
4
screws and tighten.
Steering
Wheel
Cap
