background image

IMPORTANT!

 Use this vehicle 

ONLY

 outdoors. Most interior 

floor-ing can be damaged by riding this vehicle indoors. 
Fisher-Price

®

 will not be responsible for damage to the floor 

if the vehicle is used indoors.

15

VEHICLE OPERATION

J4030pr-0920

15

K0451pr-0921

• Check all screws, lock nuts and their protective coverings 

regularly and tighten as required. Check plastic parts on a 
regular basis for cracks or broken pieces.

• During snowy or rainy weather, the vehicle should be stored 

inside or under a protective cover. Remember to charge the 
battery at least once per month while your vehicle is not in 
regular use.

• Avoid operating the vehicle in wet or snowy conditions, and do 

not spray the vehicle with a hose. Do not wash the vehicle with 
soap and water. Water or moisture in the motors or electrical 
switches can cause them to corrode, and could cause switch or 
motor failure.

• Avoid operating the vehicle on sand, loose dirt or gravel. Sand, 

loose dirt or gravel in the motors or electrical switches can 
cause them to jam, and could cause switch or motor failure.

• The vehicle can be wiped down with a soft, dry cloth. For a 

shiny finish, you can wipe plastic parts with a non-wax furniture 
polish applied to a soft-cloth. Do not use automotive wax. Do 
not use soap and water or spray the vehicle with a hose. 

• To ensure that your vehicle stays in good operating order, 

we recommend that you periodically have your vehicle checked 
by a Power Wheels

®

 authorized service center. For the location 

of the authorized service center nearest you, please visit us 
on-line at 

www.powerwheels.com

 or call

 1-800-348-0751

.

VEHICLE CARE

• Press and hold the button on the handlebar. The vehicle drives 

forward at a maximum of 2 mph.

• Help your child practice steering to learn how far and how 

quickly to turn the handlebar when driving.

• Release the button to stop!

Press

Summary of Contents for LIL' TRAIL RIDER





















Reviews: