J7825a-0920
7
K0451pr-0921
BATTERY INSTALLATION
IMPORTANT!
The battery must be removed from your vehicle
for the initial charge in order to complete assembly. After
assembly is complete, you do not need to remove the battery
from your vehicle to recharge it.
3
• Locate the lock fastener in the back end of the seat.
• Using a slotted screwdriver, turn the lock fastener 1/4 turn to the
unlocked position
.
• Lift the seat from the vehicle.
Lock
Fastener
• Loosen the screw in the battery retainer and remove it.
• Lift the battery retainer and remove the battery from the
battery compartment.
Battery
Battery
Retainer
Unlocked
2
1
Seat
Battery
Connector
Charger
Connector
B
A
• Fit the charger connector and the battery connector together
A
.
Push firmly to make sure the connectors are completely joined.
• Plug the charger into a standard wall outlet
B
.
Notes:
–
If power flow to the wall outlet is controlled by a switch,
make sure the switch is ON.
– Use the charger only in a wall outlet. Do not plug the charger
into a ceiling outlet.
•
Before first time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery after each use of your vehicle for at least
14 hours. Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the charger connector
from the battery connector. Unplug the charger from the
wall outlet. The battery is now ready to be installed in your
vehicle. If your battery is already installed in your vehicle, simply
re-connect the battery connector and motor connector. Replace
the battery retainer and the seat.
