ACS-2048 • User’s Guide
55
4. Operation
Using the Main Menu
~
75% Col bars
~
50% Gray
~
Gray Steps 1
~
Gray Steps 2
•
Raster Box
— This function enables or disables the raster box.
~
When turned
ON
, the system displays a one-pixel border around the
active output area. Note that the raster box includes gaps that enable
you to precisely align the input video to fill the output raster.
~
When turned
OFF
, the output is clean, without the border.
lìíéìí=^Çàìëí
From the
Output Menu
, select
Output Adjust
to scale the entire output to fit the theatre’s
physical setup (e.g., curtains, drapes, and off-axis projection).
Figure 4-20.
Output Adjust Menu (sample)
This adjustment must be performed while you view the projector’s output on your screen.
When you enter this menu, a solid white raster box appears at the size and position
specified within the menu. The selected input is temporarily turned off, and the output
video is black. As you adjust H and V size and position, the raster box adjusts accordingly.
When you exit the menu, the raster box is cleared, and the selected input will be scaled to
fit within this exact size and position.
The following functions are available:
•
H Size
— adjusts the horizontal size in pixels.
•
V Size
— adjusts the vertical size in lines.
•
H Position
— this field is bracketed when
H Size
is 2048. When you adjust
H
Size
below 2048, this field becomes active, enabling you to adjust horizontal
position in pixels. Positioning is limited to the overall 2048 “space,” and the image
cannot be moved off screen.
•
V Position
— this field is bracketed when
V Size
is 1080. When you adjust
V
Size
below 1080, this field becomes active, enabling you to adjust vertical position
in lines. Positioning is limited to the overall 1080 “space,” and the image cannot
be moved off screen.
•
Reset All
— resets H and V Size to 2048 x 1080, and H and V Position to [0].
O U T P U T A D J U S T
> H S i z e
2 0 4 8
V S i z e
1 0 8 0
H P o s i t i o n
[ 0 ]
V P o s i t i o n
[ 0 ]
R e s e t A l l
