ACS-2048 • User’s Guide
45
4. Operation
Using the Main Menu
•
For inputs 4 and 5:
[Analog]
•
For input 6:
[CVBS]
•
For input 7:
[Y/C]
Please note:
•
If a source type is chosen and a correct signal cannot be detected, the
Input
Format
field (in the
Input Menu
and the
Status Menu
) indicates “
Invalid Signal
.”
•
For inputs 2 and 3, analog signals can be connected to the ACS-2048 using a
customer-supplied DVI to HD-15 adaptor.
`çäçêëé~ÅÉ
From the
Input Menu
, select
Colorspace
to change the color space for the selected input.
Values depend on the selected input:
•
For input 1:
[SMPTE]
•
For input 2:
RGB
,
SMPTE
•
For input 3:
RGB
,
SMPTE
•
For input 4:
RGB
,
SMPTE
•
For input 5:
RGB
,
SMPTE
•
For input 6:
[SMPTE]
•
For input 7:
[SMPTE]
Please note:
•
The default selection for
YP
b
P
r
or
YUV
is SMPTE. In Appendix A, refer to the
“
” section on page 89 for information on the formats that are
RGB, SMPTE or both. When both RGB and SMPTE are listed, the first item in the
list is the default.
•
When the input is analog (including CVBS, Y/C or DVI), you can select between
RGB
and
SMPTE
.
•
When the following formats are detected as SD/SDI or HD/SDI, only
[SMPTE]
is
shown, and this color space is unchangeable.
~
NTSC (480i)
~
PAL (576i)
~
1280x720p @50
~
1280x720p @59.94
~
1280x720p @60
~
1920x1080p @23.98
~
1920x1080p @24
~
1920x1080p @25
~
1920x1080p @29.97
~
1920x1080p @30
~
1920x1080sF@23.98
~
1920x1080sF@24
~
1920x1080i @50
~
1920x1080i @59.94
~
1920x1080i @60
