72
ACS-2048 • User’s Guide
4. Operation
Front Panel Lockout
cêçåí=m~åÉä=içÅâçìí
The ACS-2048 includes a front panel lockout mode which when enabled, locks out the front
panel from all source selections, including the Test Pattern.
Use the following steps to lock (and unlock) the front panel:
1.
Press and hold the
SEL
and
ESC
buttons for 3 seconds. Once this button
combination has been detected, the following display appears:
Figure 4-47.
System message: Lockout Enabled
In the “lockout” mode:
~
All button pushes and all turns of the rotary knobs will be ignored.
~
All Ethernet communications and commands will function normally.
~
All button lights will continue to reflect the proper state of the inputs.
2.
To disable the front panel lockout mode, press and hold the
SEL
and
ESC
buttons
for 3 seconds. Once detected, the system returns to the previous menu that was
shown before the “lockout” mode was enabled.
F r o n t P a n e l
L o c k o u t E n a b l e d
