This monitor is intended for use in Health Care Facilities model AMM215WTD
Equipment is not suitable for use in the presence of flammable anesthetic mixture
with air or with oxygen or nitrous oxide.
No user serviceable parts inside, ask qualified personnel when accessing inside.
For disposal of waste product, follow the requirement of local code.
Electrical input rating: 13V DC 6.92A
Classification
Type of protection against electric shock: Class I Equipment.
Degree of protection against the ingress of water: IP23 compliance.
Mode of operation: Continuous
This monitor has been tested to comply with IEC/EN 60601-1, IEC/EN60601-1-2
and is certified by UL to medical standard UL60601-1(UL/cUL Mark).
Because many medical offices are located in residential areas, this monitor, in ad
-
dition to the medical requirements, has also been tested and found to comply with
the limits for FCC Class B computing devices in a typically configured system. It is
the system integrator or configurer’s responsibility to test and ensure that the entire
system complies with applicable EMC laws.
Environmental conditions for transport and storage:
-
Temperature range within -4° to 140° F (-20° to 60°C)
-
Relative humidity range within 10% to 85%
-
Atmospheric pressure range within 500 to 1060 hPa.
: UL approval mark according to the
safety standard for Medical equipment
: Direct Current
MEDICAL EQUIPMENT
WITH RESPECT TO ELECTRIC SHOCK,
FIRE AND MECHANICAL HAZARDS ONLY
IN ACCORDANCE WITH UL 60601-1, AND
CAN/CSA C22.2 NO. 601.1
Medical Equipment
E215822
AMM215WTD
27
