Barco BarcoReality SIM 6 Owner'S Manual Download

Page: 10 / 15

2. Access to the analyzers

2.2 Removing the Top Cover

Location

The Top Cover is located on the Top side of the projector.

Image 2-4
Top Cover Location

Necessary Tool

•

Flat blade screwdriver 8 mm.

Be sure the Projector Handle is in the inserted position when removing the Top Cover.

How to remove the Top Cover

1. Remove the Lens Cover. (image 2-5)

2. Pull off the 3 rubber sealing pieces covering the Top Cover screws. (image 2-6)

Tip:

Use the flat blade screwdriver to pull off / slide in the tops of the 3 rubber pieces.

3. Turn out the 3 screws connecting the Top Cover to the Projector Frame. (image 2-7)

4. Remove the Top Cover.

5. Reverse this procedure to reinstall the Top Cover.

Image 2-5
Remove the Lens Cover

R5976046 ANALYSER KIT FOR R/G 6300/6400 AND SIM6 01122003

Summary of Contents for BarcoReality SIM 6
















Search results

Summary of Contents for BarcoReality SIM 6

Reviews:

Related manuals for BarcoReality SIM 6

Brands by name

Popular brands

Barco BarcoReality SIM 6, Owner'S Manual

Search results

Summary of Contents for BarcoReality SIM 6

Reviews:

Related manuals for BarcoReality SIM 6

Brands by name

Popular brands