2. Access to the analyzers
2. ACCESS TO THE ANALYZERS
Particularities
Depending on the projector the procedure to access the analyzers may be different.
In the RSIM6 projector the top cover can be removed without removing the Lens whereas in the 6300/6400 projector the lens has
to be removed to allow cover removal.
In the images the cover color may not always coincide with the reality
2.1 Removing the lens (only for 6300/6400)
How to remove the lens ?
1. Open the lens cover by pivoting it backwards and hook it of. (image 2-1)
2. When necessary (for motorized lenses only) disconnect J4 (image 2-2)
3. Loosen the fixation screws of the motor part and pivot it upwards.
4. Open both lens locks by pulling them backwards (support the lens with one hand). (image 2-3)
5. Take the lens out of the lens house.
Image 2-1
Image 2-2
Image 2-3
R5976046 ANALYSER KIT FOR R/G 6300/6400 AND SIM6 01122003
5
