Installation Guidelines
3-2 ___________________________________________________________________________ R5975819.05 BARCO CINE 6 21112002
Where to install the projector?
To indicate a correct installation position it is necessary to know the distance :
- projector - ceiling
- projector - screen
To find this correct position for the projector, equipped with
HD 215
lenses, follow the instructions as on the screen :
The projector - screen distance (PD), or the screen width (SW), can also be determined from the programme given in the screen
by entering the screen width (SW) or prjector distance (PD) through the RCU. The correction value A will be displayed for each
value of PD or SW. Position the projector accordingly for correct results.
To find this correct position for the projector, equipped with
HD 215
lenses, formulas are given as belows :
Formulas for Projector to screen distance and correction value A with regard to the screen width for
HD 215 lenses
.
How to install the projector?
Ceiling mount or table mount?
To install the projector, apply always the BARCO kits which are specially designed for this function.
BARCO ceiling support
Always use the BARCO ceiling support to attach your projector to the ceiling. (BARCO order number :
R9827990)
The installation instruction for this support is enclosed in the packet of the set.
Barco projection table
Height adaptable projection table provides a stable stand for your projector, and makes it possible to adapt the projector perfectly to the local
requirements. (BARCO order number
R9827740)
.
Max phosphor width on CRT = 11 cm
Max phosphor width on CRT = 4.33 inch
Formulas (metric)
PD[m] = 1.1431 x SW[m] + 0.093
A[cm] = 14.14 x SW[m] - 18.21
PROJECTOR
SIDE VIEW
CEILING
CD
B
S
C
R
E
E
N
PROJECTOR
S
C
R
E
E
N
W
ID
T
H
Formulas (inch)
PD = 1.1431 x SW + 3.661
A = 0.1414 x SW - 7.169
Abbreviations used on drawing and diagrams on next pages
A
=
Correction Value, extra value to be added to B to obtain
the correct installation position. (In some cases the A
value can be negative.)
B
=
Distance between ceiling and top of the screen.
CD
=
Total distance between projector and ceiling.
CD
=
A + B (When the result is negative, enlarge the dis-
tance between ceiling and top of the screen, mount
screen lower, until CD becomes zero or positive)
SW =
Screen Width.
PD
=
Perpendicular Distance between screen and projector.
