Installation Adjustments
R5975819.05 BARCO CINE 6 21112002 ____________________________________________________________________________ 7-5
Press
ENTER
to activate the raster on the red CRT faceplate.
Shift the raster with the control keys the raster is centered in the middle of the CRT faceplate.
Press
ENTER
to activate the raster on the blue CRT faceplate.
Shift the blue raster with the control keys the raster is centered on the CRT faceplate.
Press
ENTER
to continue with the CRT projection angle adjustment
ENTER
continues to CRT projection angle adjustment.
EXIT
returns to optical focusing.
ADJUST
returns to operational mode.
Raster centering
The raster must be centered on the CRT screen surface of each tube, therefore, it is necessary to look into the lenses.
WARNING :
In order to ensure maximum CRT longevity and to avoid CRT damage, do not shift the raster outside the phosphor
area of the CRT.
Press
ENTER
to display the raster on the green CRT.
Look into the green lens and shift the raster with the control keys it is centered in the middle of the CRT faceplate.
correct raster position
wrong raster position
forbidden area
projected raster
crt faceplate border
phosphor border
RASTER CENTERING
CONTRAST LEVEL IS REDUCED
AND BRIGHTNESS INCREASED
TO MAKE THE RASTER
VISIBLE ON THE FACE PLATE
OF EACH CRT.
USE THE ARROW KEYS
TO CENTER THE RASTER
ON THE GREEN, RED AND
BLUE CRT RESPECTIVELY
<ENTER> to continue
<EXIT> to return.
