Installation adjustment mode
7-5
5976065 BARCOCINE 8 10022000
$ %
& '
( )
*
+
Loosen bolts A, B, C and D to pivot the red CRT until the center of the Red image and the center of the Green image coincide. When
the angle of the red CRT is corrected, tighten the four bolts.
Press ENTER to continue with blue and green crosshairs.
Press EXIT to return to the CRT projection angle adjustment menu.
Red crosshair
Green crosshair
Move the red CRT towards
the green CRT
Red crosshair
Green crosshair
Move the red CRT to the
outside, away from the
green CRT
Loosen bolts E, F, G and H to pivot the blue CRT until the center of the Blue image and the center of the Green image coincide. When
the angle of the blue CRT is corrected, tighten the four bolts.
Press ENTER to continue with the diagonal focusing menu.
Press EXIT to return to the CRT projection angle adjustment.
Blue crosshair
Green crosshair
Move the blue CRT to the
outside, away from the
green CRT
Blue crosshair
Green crosshair
Move the blue CRT towards
the green CRT
Projection angle correctly aligned for
screen width SW1.
The same projection angle is misaligned for new screen width
SW2. Realignment is necessary. Each screen width change
requires readjustment of the projection angle.
SW2
(SW1 > SW2)
370b
