BARCO ——————————————————— 7
————————————— Projection Systems
Mounting the base
plate
to
the
projector
Fix the ceiling plate to the ceiling, and assemble the base plate to the projector as shown.
1
2
1
2
Fix the spacer and bearing on the underside of the projector
as shown.
While fixing the base plate to the projector take care that the
lead nut shaft passes through the bearing while assembling.
If necessary shift the lead nut by rotating the lead shaft screw
with the nut spanner.
Step
Action
Image
Illustrations
Mounting the Assembly
Screws shaft
This shaft should pass
through the bearing
Bearing
B358953
Spacer
R822216
Location of fixing the
spacers and bearing.
