manualshive.com logo in svg

Barco CLM R10+, User Manual

The Barco CLM R10+ is a cutting-edge multimedia projector with exceptional specifications. Designed for professional use, this high-performance device delivers stunning visuals and offers utmost user convenience. Explore its full potential by downloading the free user manual from our website, where you can access a comprehensive guide to unlock all its features and capabilities.

Share
Download
background image

2. General

2. GENERAL

About this chapter

Read this chapter before installing your CLM R10+. It contains important information concerning installation requirements for the
CLM R10+, such as minimum and maximum allowed ambient temperature, humidity conditions, required safety area around the
installed projector, required power net, compatible signal sources, etc.

Furthermore, careful consideration of things such as image size, ambient light level, projector placement and type of screen to use
are critical to the optimum use of the projection system.

Overview

•

Installation requirements

•

Unpacking the projector

•

Box content

•

Projector con

fi

gurations

•

Projector air inlets and outlets

•

Free download of Projector Toolset

2.1

Installation requirements

Ambient temperature conditions

The maximum allowed ambient temperature for an operating Barco CLM R10+ may not 40 ºC (+104 ºF).

The minimum allowed ambient temperature for an operating Barco CLM R10+ may not drop below +10 ºC (+50 ºF).

The projector will not operate if the ambient air temperature falls outside this range (+10 ºC

→

+40 ºC or +50 ºF

→

+104 ºF). Be

aware that room heat rises to the ceiling. Check if the temperature near the installation site is not excessive.

The minimum storage temperature is -35 ºC (-31 ºF) and the maximum storage temperature is +65 ºC (+149 ºF).

Humidity conditions

Storage: 0 to 98% relative humidity, non-condensing.

Operation: 0 to 95% relative humidity, non-condensing.

High Altitude

For an optimal performance of the CLM at high altitude, make sure that suf

fi

cient air

fl

ow is available (maximum ambient temperature

30°C).

Projector weight

Do not underestimate the weight of one Barco CLM R10+, which is about ±31 kg (±68 lb.). Be sure that the table or truss installation
on which the projector(s) has to be installed is capable of handling

fi

ve (5) times the complete load of the complete system.

Power requirements

One Barco CLM R10+ (order number R9050100 and R90501001) requires 100-120/200-240V 12/8A 50/60Hz.

One Barco CLM R10+ (order number R90501005) requires 100-120/200-240V 16/8A 50/60Hz.

Clean air environment

A projector must always be mounted in a manner which ensures the free

fl

ow of clean air into the projectors ventilation inlets. For

installations in environments where the projector is subject to airborne contaminants such as that produced by smoke machines or
similar (these deposit a thin layer of greasy residue upon the projectors internal optics and imaging electronic surfaces, degrading
performance), then it is highly advisable and desirable to have this contamination removed prior to it reaching the projectors clean
air supply. Devices or structures to extract or shield contaminated air well away from the projector are a prerequisite, if this is not a
feasible solution then measures to relocate the projector to a clean air environment should be considered.

Only ever use the manufacturer’s recommended cleaning kit which has been speci

fi

cally designed for cleaning optical parts, never

use industrial strength cleaners on the projector’s optics as these will degrade optical coatings and damage sensitive optoelectronics
components. Failure to take suitable precautions to protect the projector from the effects of persistent and prolonged air contam-
inants will culminate in extensive and irreversible ingrained optical damage. At this stage cleaning of the internal optical units will
be noneffective and impracticable. Damage of this nature is under no circumstances covered under the manufacturer’s warranty
and may deem the warranty null and void. In such a case the client shall be held solely responsible for all costs incurred during any
repair. It is the clients responsibility to ensure at all times that the projector is protected from the harmful effects of hostile airborne
particles in the environment of the projector. The manufacturer reserves the right to refuse repair if a projector has been subject to
knowingly neglect, abandon or improper use.

R59770021 CLM R10+ 11/10/2010

11

Summary of Contents for CLM R10+






































































































































































































































Reviews:

No comments

Related manuals for CLM R10+

ViewSonic PJD5233 Specification preview
PJD5233
Brand: ViewSonic Pages: 2
M-system MDP-TL Instruction Manual preview
MDP-TL
Brand: M-system Pages: 3
Taiden TES-5600 Installation And Operating Manual preview
TES-5600
Brand: Taiden Pages: 71
BOXLIGHT CP718e User Manual preview
CP718e
Brand: BOXLIGHT Pages: 55
P3 International P4320 Operating Manual preview
P4320
Brand: P3 International Pages: 10
HQ Power VDL1501RO Manual preview
VDL1501RO
Brand: HQ Power Pages: 14
A&D bestView ADF-3200A Operating Instructions (Functional Manual) preview
bestView ADF-3200A
Brand: A&D Pages: 23
Panasonic PT-51G53X Operating Instructions Manual preview
PT-51G53X
Brand: Panasonic Pages: 36
Sharp XG-F315X Specification Sheet preview
XG-F315X
Brand: Sharp Pages: 2
Sharp XG-C45XU Quick Start Reference Sheet preview
XG-C45XU
Brand: Sharp Pages: 5
Sharp XG-MB70X Setup Manual preview
XG-MB70X
Brand: Sharp Pages: 30
Sharp XG-NV1E Operation Manual preview
XG-NV1E
Brand: Sharp Pages: 34
Sharp XG-F260X Service Manual preview
XG-F260X
Brand: Sharp Pages: 24
Sharp PGF310X - Notevision XGA DLP Projector Specifications preview
PGF310X - Notevision XGA DLP Projector
Brand: Sharp Pages: 2
Sharp PG-LX3500 Specification preview
PG-LX3500
Brand: Sharp Pages: 2
Sharp PG-LX3000 Information Sheet preview
PG-LX3000
Brand: Sharp Pages: 2
Sharp PG-LW3500 Quick Manual preview
PG-LW3500
Brand: Sharp Pages: 2
Sharp SharpVision XV-370H Operation Manual preview
SharpVision XV-370H
Brand: Sharp Pages: 23

Brands by name

Popular brands

Load more brands