4. Getting Started
RCU
Image 4-3
RCU Hardwired
4.5
Duet II Address
What is the Duet II Address?
Each Duet II can be set to an individual Duet II Address, this can be set between ’0’ and ’255’.
Controlled by
Duet II Address
Standard Barco Projector RCU
0–9
Computer (IBM PC or compatible, Apple, ...)
0–255
Default the Duet II Address is set to ’9’.
How to set the Duet II Address?
To Adjust the Barco Duet II Address see "Change Duet II Address", page 52.
4.6
RCU Address
The RCU Address can be any digit between ’0’ and ’9’.
How to set the RCU Address?
1. Press the recessed
Address
key with a pencil. (image 4-4)
The Duet II Address will be displayed (1 digit) on the BARCO Duet II LCD Display.
2. Enter the RCU Address by pressing a single digit key, within 5 seconds after pushing the address key.
Note:
If no digit is entered within 5 seconds the RCU will return to the default ’0’ address.
22
R5976550 BARCO DUET II 10/05/2007