5. Random Access
4. Press
ENTER
to select.
Duet II Interface
Load
Edit
Rename
Copy
Delete
Delete All
Options
Please select item
Menu 5-5
Duet II Interface
sXGA_96.s01
sXGA_120.s01
XGA_96.s01
sXGA_96.c01
sXGA_96.c02
Please select item
Menu 5-6
The image is not perfect?
If the displayed image is not correct after selecting the best fitting file, go to the
Edit
menu and adjust the file settings.
5.3.5
Changing the settings
Different methods
The 3 different methods to change a setting will be described hereafter. These methods are:
•
with the numeric keys on the remote control.
•
with the arrow keys selecting the changing digit.
•
with the arrow keys counting up or down.
How to change a setting with the numeric keys?
1. Push the cursor key
↑
or
↓
to highlight an item.
The color of the selected item will change.
2. Press
ENTER
to activate the digits.
3. Enter directly with the numeric keys on the RCU or local keypad the new value.
How to change a setting with the cursor keys?
1. Push the cursor key
↑
or
↓
to highlight an item.
The color of the selected item will change.
2. Press
ENTER
to activate the digits.
3. Push the cursor key
←
or
→
to select the changing digit.
4. Push the cursor key
↑
or
↓
to scroll to the desired digit.
5. When finished, press
ENTER
to confirm.
How to change a setting with the cursor keys and counting up or down?
1. Push the cursor key
↑
or
↓
to highlight an item.
The color of the selected item will change.
2. Press
ENTER
to activate.
3. Counting up or down by pushing the cursor key
←
or
→
.
5.3.6
File Parameters
File Parameters Overview
Following values are available when starting up the Edit procedure of a file:
Total Pixels
If the value for ’Total Pixels’ is wrong, sampling mistakes (small vertical bars with noisy and unsharp
data in the projected image) will be seen in the image. These vertical bars are best seen on a pixel
on/off pattern. Select a pixel on/off pattern and highlight "Total" and adjust the pixel quantity. Adjust
for zero bars. Hint: if the number of bars increase, adjust in the other direction.
Active Pixels
The ’Active Pixels’: determine the width of the window on the screen. This value is normally given in
the source specifications. If not, adjust until full image is displayed (no missing pixels).
32
R5976550 BARCO DUET II 10/05/2007
