5. Random Access
The
Advance Edit File
menu will be displayed. (menu 5-11)
Duet II Interface
sXGA_ 60.s01
Total Pixels :
01408
Actual Pixels :
01024
Start Pixel:
00314
Total Lines:
00830
Actual Lines:
00768
Start Line:
00054
Advanced
Output Clock
Please select item
Menu 5-10
Duet II Interface
Fieldrate :
06000
Clampposition:
00005
Clamp Width :
00016
OutStartPixel:
00321
OutStartLine :
00036
Stereo Select
Detect Tot Pix
Please select item
Menu 5-11
When to use Stereo Select?
Some IG’s will set the Left Image Signal to High, others will prefer the Right Image Signal. Adjust the Stereo Selection till the Left
Image is projected for the Left Eye and the Right Image is projected for the Right Eye. When the Left/Right Image is correctly
displayed, the 3D effect is much deeper and changing in perspective when moving around while looking at the image.
1. Push the cursor key
↑
or
↓
to highlight Stereo Select.
2. Press
ENTER
to select.
The
Stereo Select
menu will be displayed. (menu 5-12)
3. Push the cursor key
↑
or
↓
to select the desired Stereo Selection.
4. Press
ENTER
to select.
Note:
The current Stereo Selection is displayed on top of the menu.
Duet II Interface
High = Left
High = Left
High = Right
Please select item
Menu 5-12
When to use Detect Total Pixels?
When there is no information available about the Total Pixels of the IG File, follow this procedure to adjust the Total Pixel settings of
the Projector and the Duet II File:
1. Select the Phase Adjustment pattern inside the Internal Patterns (see "Internal Patterns", page 49).
2. Edit the Projector File until all bars in the pattern disappear (See the Projector’s Owner’s Manual).
3. On the Duet II push the cursor key
↑
or
↓
to highlight
Detect Tot Pix
and press
ENTER
to select. (menu 5-13)
The
Total Pixel
menu will be displayed. (menu 5-14)
4. Edit the Duet II File until all bars in the pattern disappear (see "Analog Output System Setup", page 24).
5. Repeat step 1 and 2 to edit the Projector File a second time.
Duet II Interface
Fieldrate :
06000
Clampposition:
00005
Clamp Width :
00016
OutStartPixel:
00321
OutStartLine :
00036
Stereo Select
Detect Tot Pix
Please select item
Menu 5-13
Duet II Interface
Total Pixels :
1310
Please select item
Menu 5-14
How to Display the Output Clock menu?
1. Push the cursor key
↑
or
↓
to highlight
Output Clock
. (menu 5-15)
34
R5976550 BARCO DUET II 10/05/2007
