4. Maintenance
4. MAINTENANCE
4.1
Scheduled maintenance
About
The MDRC-2222 does not require any scheduled maintenance or calibration activities. We recommend
to use QAWeb with the Barco default tests and frequencies to calibrate and maintain the display, or to
return the display to a Barco approved maintenance organization. In any case of doubts, please contact
Barco Healthcare.
4.2
Cleaning
W
ARNING
:
Unplug the power cable from the mains power input before cleaning the
display.
C
AUTION
:
Take care not to damage or scratch the front glass or LCD. Be careful with
rings or other jewelry and do not apply excessive pressure on the front glass or LCD.
C
AUTION
:
Do not apply or spray liquid directly to the display as excess liquid may cause
damage to internal electronics. Instead, apply the liquid to a cleaning cloth.
To clean the display
Clean the display using a sponge, cleaning cloth or soft tissue, lightly moistened with a recognized clean-
ing product for medical equipment. Read and follow all label instructions on the cleaning product. In case
of doubt about a certain cleaning product, use plain water.
Possible cleaning solutions:
•
70% isopropyl alcohol
•
1.6% aqueous ammonia
•
Cidex® (2.4% glutaraldehyde solution)
•
Sodium hypochlorite (bleach) 10%
•
“Green soap” (USP)
•
0.5% Chlorehexidine in 70% isopropyl alcohol
•
Like Cleansafe® optical cleaning liquid
Do not use following products:
K5902146 (451920612622) EONIS 12/01/2018
19
