6. GUI orientation
6.18 Programming Menu > Sources area
General
This part of the
Programming
page allows users to manage the available input sources. Sources are created and de
fi
ned from the
available Inputs that were de
fi
ned on the
System Con
fi
guration
page.
About Sources and Inputs
Source are de
fi
ned from input signals. Multiple sources can be de
fi
ned from the same input. After a source is de
fi
ned, then several
attributes can be modi
fi
ed. These attributes are: color adjustments, crop, sharpness and mask. By default, a source is automatically
created for each Input. Up to 256 sources can be created form the same input. As with inputs, sources can be de
fi
ned from multiple
connectors, ex: 4K or DL DVI and as a single link or dual link.
The multiviewer displays input signals not sources.
Few words about Inputs, Sources and Layers
Input
•
De
fi
nition
: Any video signal connected to the E2.
•
Features
:
-
An input signal can be 2K (Single Link), Dual-Link or 4K (Ultra-HD) format.
-
Depending on the resolution and type of the input signal, multiple connectors may be required to connect an input signal to
the E2. The number of connectors required is listed in the table below.
2K
Resolutions up to
2048x1200@60
Dual Link
Resolutions up to
3840x1200@60
4K (Ultra HD)
Resolutions up to
4096x2160@60
SDI
1
2
4
DVI
1
1
2
HDMI 1.4a
1
1
2
DisplayPort 1.1a
1
1
2
•
Adjustments
:
-
Contrast, Brightness and Gamma.
-
Adjustments to an input signal have an effect on all sources that are derived from the input signal
Source
•
De
fi
nition
: A video signal created when an input is manipulated to create a desired look.
•
Features
:
-
When an input is created, a source is automatically created with the same attributes as the input.
-
Multiple sources can be generated from the same input signal.
-
Any source can be dropped into any layer and any destination.
-
The same source can be used in multiple layers and multiple destinations.
-
It should be noted that if a source is used in multiple layers and a source is modi
fi
ed in one of the layers, it will not be
automatically updated in the other layers. To update the source in the other layers, it needs to be deleted from these layers
and re-inserted from the sources list.
•
Adjustments
:
-
Size, Position, Contrast, Brightness and Hue.
Layer
•
De
fi
nition
: A layer is one image stacked on top of another or a background.
106
R5905948 E2 12/12/2014
Summary of Contents for Event Master E2
