7. System Setup
7.13 Con
fi
guration Menu > Add Outputs
General
In this procedure, you will add Outputs to the system .
Prerequisite
•
Ensure that you are familiar with the
Con
fi
guration Menu
. For details on this menu, please refer to chapter "Con
If more than one Output is utilized, repeat the below steps until all inputs are added and adjusted.
Add Output
1. Click on the
Output
tab to select the outputs that will be de
fi
ned.
2. Click on the
+Add Output
blue button to enter the Add mode.
3. Click on the connector that the display device is connected to add it as an output.
4. Click on the
Done Adding
button to exit the Add mode.
(Optional) Edit the Name
1. Double click on default name in the Name list to edit the name.
2. When the area turns blue, click the
eraser
icon to clear the
fi
eld.
3. Type a new name.
(Optional) Adjust Output Parameters
Click on the
Adjust
tab that is located on the top. From this menu you can adjust:
1. Edit the name.
2. Select Format value, color space and connector type.
3. Enable Test Patterns with raster box and enable diagonal motion.
4. De
fi
ne the Area of interest (AOI).
5. Perform color adjustments.
6. Read all timing parameters associated with the selected format.
7. Select SDI type and SMPTE standards.
8. Adjust HDMI parameters.
(Optional) Auto create Outputs
If the Auto create Outputs is pressed, then the software will add all unassigned outputs to the output list and number them sequen-
tially. This button is a shortcut for systems utilizing a large number of outputs.
(Optional) Delete Outputs
1. Click on the blue button
Delete Output(s)
.
2. From the Name list click on the “
x
” space next to the Output(s) you wish to delete.
3. Hit the red button
Delete Output(s)
button. All of the selected Outputs will be removed from the list.
170
R5905948 E2 12/12/2014
Summary of Contents for Event Master E2
