1. Safety
1. SAFETY
About this chapter
Read this chapter thoroughly before attempting to install or operate the projector.
To prevent personal injury to users or physical damage to the projector while installing and using your projector, ensure that you
understand and follow all safety guidelines, instructions and warnings included in this chapter and this manual.
Clari
fi
cation of the term F70 / F90 series used in this document
Use in this document of the term, F70 / F90 series, means that the content is applicable for the following products:
•
F90–W13WUXGA
•
F90–4K13 4KUHD/WQXGA
•
F70 — 4K6
•
F70 — W6
De
fi
ning the GP6 platform
The F90 series products in general, are all products within the Barco GP6 Platform.
De
fi
ning the GP7 platform
The F70 series products in general, are all products within the Barco GP7 Platform
Overview
•
•
•
•
•
Hazard Distance for fully closed projection system
•
HD in function of the lens Throw Ratio (TR)
•
•
•
•
•
1.1
General considerations
Notice on optical radiation F90 Series
•
The projector is Class 1 laser product that conforms with IEC EN 60825-1:2014. For Northern America, the projector is class
3R laser product up to throw ratio 2.33. The projector conforms with IEC 60825–1:2007, and with performance standards for
laser products under 21 CFR 1040, except with respect to those characteristics authorized by Variance Number 2016–V-0144
effective March 6, 2017
Do not stare into Beam.
•
This projector is Risk Group 2 (RG2) according to IEC EN 62471-5.
This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 3.15 is installed.
For Northern America, installation requirements according to Risk group 3 (RG3) must be followed when interchangeable lens
with throw ratio greater than 2.33 is installed.
Refer to the manual for the lens list and throw ratio before operation.
Such combination of projector and lens are intended for
professional use only
, and are not intended for consumer use.
•
For RG3, no direct exposure to the beam shall be permitted.
For RG3, operators shall control access to the beam within the hazard distance or install the product at a height that will prevent
eye exposure within the hazard distance.
•
This projector has two (2) built-in Class 4 laser clusters. Disassembly or modi
fi
cation is very dangerous and should never be
attempted.
•
Any operation or adjustment not speci
fi
cally instructed by the user’s guide creates the risk of hazardous laser radiation expo-
sure.
•
Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation.
601–426 F70 SERIES 16/06/2017
3
Summary of Contents for F70-W8
