R5906069 /01
HDX 4K
Quick Start Guide
Install Lens & Lens safety cable
!! ONLY USE TLD+ Zoom Lenses !!
1.
Remove the plastic cover from the Lens Holder opening.
2.
Place the Lens Holder in unlock position. Handle towards electrical socket.
3.
Gently insert the lens. Ensure the lens connector matches the electrical socket on the Lens Holder.
4.
Insert the lens until the connector seats into the socket.
5.
Secure the lens in the Lens Holder. Move the handle into the lock position.
6.
Check if the lens touches the front plate of the Lens Holder.
7.
Check if the lens is really secured by trying to pull the lens out of the Lens Holder.
8.
Install the lens safety cable tightly around the lens. Keep safety cable as short as possible.
9.
Attach lens safety cable with projector frame. Keep safety cable as short as possible.
Connect power
Ensure that the power is properly connected to the power input.
(110-130V / 200-240V, 15A, 50-60Hz)
Download Product Manual
Product manuals and documentation are available online at
www.barco.com/td/R9012100
Registration may be required; follow the instructions given on the website.
IMPORTANT!
Read Installation Instructions before connecting equipment to the mains power supply.
