1. Introduction
Barco – Hydra Compact – R5976568 – Revision 10 – February-2004
____________________________________________________________________________________________
1-4
1.3 Safety instructions
This section describes safety precautions, which must be observed when installing and operating a product from
Barco.
1.3.1 Precautions
For your own protection, observe the following safety precautions when installing,
operating and servicing your device:
•
Before operating the units please read this manual thoroughly and retain it for future reference!
•
Observe all warnings and instructions printed on the devices!
•
Servicing not explicitly mentioned in this manual should never be carried out by unauthorized personnel!
Never open the case of the unit without first disconnecting both power supply cords!
•
The appliance couplers on this unit must be used for disconnecting the unit from the mains circuit. For
removal of all power from the unit, always disconnect both supply cords.
•
To prevent fire or electrical shock hazard, do not expose this unit to rain or moisture!
•
This product should be operated from an AC power source!
•
Check that the voltage and frequency of your power supply match those printed on the device label with the
rated electrical values!
•
If you are not sure of the type of AC power available, consult your dealer or local power company!
•
This product is equipped with a 3-wire grounding plug, a plug having a third (grounding) pin. This plug will
only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into
the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the
Do not defeat the purpose of the
grounding-type plug!
•
This equipment must be grounded (earthed) via the supplied 3 conductor AC power cables. (If the supplied
power cables are not the correct on, consult your dealer.)
Summary of Contents for Hydra Compact
Page 1: ......
