MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide
23
3. Operation
Menu Structure
4.
To “accept” the new IP address, press
ESC
at any time to exit the edit mode. The
new IP address will take effect at this point.
póëíÉã=p~îÉ
From the
System Menu
, select
System Save
to save all settings except routing. When
pressed, the menu briefly displays “
Saving
.”
póëíÉã=oÉÅ~ää
From the
System Menu
, select
System Recall
to recall all settings except routing.
When pressed, the menu briefly displays “
Recall
.”
c~Åíçêó=oÉëÉí=jÉåì
From the
Setup Menu
, select
Factory Reset
to display the
Factory Reset Menu
.
Figure 3-11.
MatrixPRO Factory Reset Menu
The user must make a deliberate decision to perform a factory reset. When this function is
performed, the following conditions will take effect:
•
All output channels will be blanked.
•
The serial communications protocol will be set to RS-232 and the parameters will
be those default setting noted in the RS-232 sub-menu.
•
The RS-485 node number will be set to
17
.
•
All channels will have their reclocking circuits enabled.
•
Vertical interval switching will be set to
Enabled
.
•
The IP address will be reset to the default value of
192.168.000.242
.
FACTORY RESET
<SEL> = Yes
<ESC> = No
Summary of Contents for MatrixPRO
Page 1: ...rëÉêÛë dìáÇÉ NSñNS åÇ UñU eaLpaJpaf oçìíÉê Manual 26 0401000 00 Revision A June 29 2005 ...
Page 10: ...x MatrixPRO 16x16 and 8x8 HD SD SDI Router User s Guide Table of Contents ...
Page 16: ...6 MatrixPRO 16x16 and 8x8 HD SD SDI Router User s Guide NK fåíêçÇìÅíáçå Technical Description ...
Page 90: ...80 MatrixPRO 16x16 and 8x8 HD SD SDI Router User s Guide Index ...
