28
MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide
3. Operation
Control of Digital Video Switching
`çåíêçä=çÑ=aáÖáí~ä=sáÇÉç=pïáíÅÜáåÖ=======
Use the following steps to perform a switch:
1.
Select an output channel (destination) from among the lower eight output buttons.
On the 16x only, use the
SHIFT
button adjacent to the Output Row to access
outputs 9-16 as required.
2.
To select a new input source, press the desired key. On the 16x only, use the
SHIFT
button adjacent to the Input Row to access inputs 9-16 as required. The
newly selected input key will blink.
3.
Press
Take
. The newly selected input key will light steadily.
4.
To de-assign an input from an output, press the desired output key. This key will
light, along with the currently assigned input channel.
5.
Press and release the input key, which will begin to blink.
6.
Press
Take
. The input channel key will go dark, indicating that the input has been
de-assigned and that output channel has been “blanked.”
Note
If an input is already associated with that output, the input key
will light. If there is no input channel associated with the
selected output, all input keys will be dark.
Note
To cancel the route
before
pressing
Take
, press
ESC
. The
previous input channel selection will remain in force.
Summary of Contents for MatrixPRO
Page 1: ...rëÉêÛë dìáÇÉ NSñNS åÇ UñU eaLpaJpaf oçìíÉê Manual 26 0401000 00 Revision A June 29 2005 ...
Page 10: ...x MatrixPRO 16x16 and 8x8 HD SD SDI Router User s Guide Table of Contents ...
Page 16: ...6 MatrixPRO 16x16 and 8x8 HD SD SDI Router User s Guide NK fåíêçÇìÅíáçå Technical Description ...
Page 90: ...80 MatrixPRO 16x16 and 8x8 HD SD SDI Router User s Guide Index ...
