62
MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
RS-232 Mode
opJOPO=jçÇÉ
The MatrixPRO will respond with a “
#
” prompt when the command processor is ready for a
command. The command syntax is shown below
cmd arg1 arg2 … argn<cr>
Please note:
•
A space (ASCII 32) must be inserted between the command and any arguments
that follow. A space must also be inserted between all argument parameters,
except for the last argument in the chain.
•
All commands in RS-232 mode must be terminated with a carriage return (ASCII
13). The carriage return will tell the command processor to begin execution of the
command.
•
Query commands will return the following:
=result
#
The “=” indicates that a result from a query command is following. The “result” will
follow directly after the “=”. The value of the result will vary depending on the
query command used. A new line will be generated and the prompt (
#
) will
indicate the system is ready for a new command.
Table B-2.
RS-232 Command Syntax
Command
Description
cmd
cmd is any valid MatrixPRO command, typically 2 to 6 alphabetic
(non numeric) characters
arg
argument1, argument2, … argument"N" are required or optional
parameters depending on the command used.
<cr>
carriage return (ASCII 13) terminates the command
Summary of Contents for MatrixPRO
Page 1: ...rëÉêÛë dìáÇÉ NSñNS åÇ UñU eaLpaJpaf oçìíÉê Manual 26 0401000 00 Revision A June 29 2005 ...
Page 10: ...x MatrixPRO 16x16 and 8x8 HD SD SDI Router User s Guide Table of Contents ...
Page 16: ...6 MatrixPRO 16x16 and 8x8 HD SD SDI Router User s Guide NK fåíêçÇìÅíáçå Technical Description ...
Page 90: ...80 MatrixPRO 16x16 and 8x8 HD SD SDI Router User s Guide Index ...
