Operation
39
Standard input mode
OSD position
With the OSD function you can select where on the screen the OSD
menu text will appear. You can select between center position, top left,
top right, bottom left or bottom right.
Quick OSD menu
In this submenu from the Settings menu, you can determine which
menus will appear in the Quick OSD menu.
A check mark after a menu name indicates that menu is included in the
Quick OSD.
A cross after a menu name indicates that menu is excluded from the
Quick OSD.
If all possible menus are excluded, the Quick OSD will not appear on the
screen.
Name
Description
RGB->RGB
The R video signal drives the R sub-pix-
els, the G video signal drives the G sub-
pixels and the B video signal drives the
B sub-pixels. This is the preferred set-
ting for color display controllers.
R->Y
The Red video signal from the imaging
board is used as luminance value to
drive the RGB subpixels of the panel
equally.
G->Y
The Green video signal from the imag-
ing board is used as luminance value to
drive the RGB subpixels of the panel
equally.
B->Y
The Blue video signal from the imaging
board is used as luminance value to
drive the RGB subpixels of the panel
equally.
