background image

Preface

4

Preface

Copyright

This document is copyrighted.  All rights are reserved.  Nor this 
document, nor any part of it, may be reproduced or copied in any form 
or by any means - graphical, electronic, or mechanical including 
photocopying, taping or information storage and retrieval systems - 
without written permission of Barco

© 2006 Barco N.V. All rights reserved.

Notice

Although every attempt has been made to achieve technical accuracy in 
this document, we assume no responsibility for errors that may be 
found. Our goal is to provide you with the most accurate and usable 
documentation possible; if you discover errors, please let us know.

BarcoView software products are the property of BarcoView.  They are 
distributed under copyright by Barco N.V. or BarcoView, LLC., for use only 
under the specific terms of a software license agreement between 
Barco N.V. or BarcoView LLC. and the licensee.  No other use, duplication, 
or disclosure of a BarcoView software product, in any form, is 
authorized. 

The specifications of BarcoView products are subject to change without 
notice.

Trademarks

All trademarks and registered trademarks are property of their 
respective owners.

FCC notice (display)

This equipment has been tested and found to comply with the limits of 
a Class A digital device, pursuant to Part 15 of the FCC rules. These limits 
are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial 

Summary of Contents for MIVD 1218 MKII

























































Reviews: