background image

1. Introduction 

 

Barco – NGC-105 – R59770204 – Revision 00 – June 2008 

______________________________________________________________________________________________________

 1-6 

 

Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the 

cord. To disconnect the cord, pull it out by the plug. Never pull the cord itself. 

 

If an extension cord is used with this product, make sure that the total of the ampere ratings on the products 

plugged into the extension cord does not exceed the extension cord ampere rating. 

 

Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage 

points or short out parts that could result in a risk of fire or electric shock.  

 

Never spill liquid of any kind on the product. Should any liquid or solid object fall into the cabinet, unplug the 

set and have it checked by qualified service personnel before resuming operations. 

 

Lightning - For extra protection for this video product during a lightning storm or when it is left unattended 

and unused for a long period of time, unplug it from the wall outlet. This will prevent damage to the unit 
due to lightning and AC power-line surges. 

 

 

 

Due to high touch current, the NGC-105 is intended to be used in a location having 
equipotential bonding: 

 

 

 

The building installation shall provide a means for connection to protective earth. 

 

The equipment is to be connected to that means. 

 

A service person shall check whether or not the socket outlet from which the equipment is to be powered 

provides a connection to the building protective earth. If not, the service person shall arrange for the installa-
tion of a protective earthing conductor from the separate protective earthing terminal to the protective earth 
wire in the building. 

1.4.3

 

Unpacking of devices 

Note advises on the packaging for unpacking! 

1.4.4

 

Installation 

 

 

 

Only authorized personnel may install the device! 

 

 

 

Use only the power cord supplied with your unit. While appearing to be similar, other power cords have not 

been safety tested at the factory and may not be used to power the unit. For a replacement power cord, 
contact your dealer. 

 

Slots and openings in the cabinet and the sides are provided for ventilation; to ensure reliable operation of 

the unit and to protect it from overheating, these openings must not be blocked or covered. The openings 
should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product 
should never be placed near or over a radiator or heat register. This unit should not be placed in a built-in in-
stallation or enclosure unless proper ventilation is provided. 

 

The maximum recommended ambient temperature for this equipment is 40° C. 

 

When using the unit in a multi-unit rack assembly or closed assembly the ambient temperature inside the 

assembly may not succeed the maximum rated ambient temperature. 

 

When installed in a rack, the installation should be such that the amount of air flow required for safe opera-

tion of the equipment is not compromised. The mounting of the equipment should be such that no hazardous 
condition is achieved due to uneven mechanical loading. 

Summary of Contents for NGC-105








































Reviews: