3. Lamp replacement
(e)
(d)
Image 3-9
Note:
You cannot turn on the projector without attaching the lamp cover.
12.Insert the side cover (c) into the projector and tighten two screws (a) on the rear and two screws (b) on the side of the side cover
using a Phillips screwdriver.
(c)
(b)
(a)
Image 3-10
3.4
Reset of the lamp operation time
What can be done?
You can reset the lamp operation time of the newly installed lamp using the menu.
How to reset
1. Plug the power cord into the wall outlet.
2. Press the
POWER
key.
3. Display the
FEATURE
menu in the
ADVANCED
menu.
4. Select
ADVANCED MENU
by pressing the
▲
or
▼
key.
ADVANCED MENU
ENTER
Image 3-11
5. Press the
ENTER
key.
6. Select
LAMP 1 TIME RESET
or
LAMP 2 TIME RESET
by pressing the
▲
or
▼
key.
LAMP 1 TIME RESET
OK
LAMP 2 TIME RESET
OK
Image 3-12
7. Press the
ENTER
key.
The con
fi
rmation dialog appears.
EXECUTE LAMP 1 TIME RESET ?
OK : ENTER CANCEL : MENU
Image 3-13
8. Reset by pressing the
ENTER
key.
When the lamp operating time is not reset, press the
MENU
key.
14
R5905598 PHXX SERIES 28/01/2014
