2. Installing the lens
Image 2-4
Image 2-5
Detail of the lens locking handle and pin
3. Pull out the locking pin and flip the lens locking handle to the right (with the index finger) at the same time.
4. Pull the lens gently out of the lens holder.
2.2.4
Mounting the lens
How to mount the lens
1. Bring the lens gently into the lens holder and press gently so as to open the 3 locking points
The position of the lens is now secured by the 3 locking points.
Image 2-6
Lens mounting
1
Lens locking points
2. Lock the handle with the locking pin
3. Connect the lens to the motor connection board
2.2.5
Mounting the lens cover
How to mount the lens cover
1. Open the protective cloth and slide the cover over the lens.
2. Bring the lens cover backwards and position it.
R5976893 QHD (2.1-3.0:1) LENS 22/03/2006
5
