2-3
Location and Function of Control
5975948 RETRODATA 2100 210198
Rear input panel description & function, key diagram :
$8',2287
$8',2,1&
$8',2,1%
$8',2,1$
9,'(2
9,'(2
69,'(2
5*%+&9
5*%+&9
/5
/5
/5
/5
,5
5
5
*
*
%
%
+&
+&
9
9
72/2&$/&21752/21/<
3257
3257
3257
3257
3257
56,1 56287 &2003257 &75/
hard wire remote
2KP:
/5
01
A/C Power Switch
: '1' = on, '0' = off. To remain in the '1'
= on position permanently
10
Port 5 : RGB H/C V input :
RGB analog input with standard
sync on 5 BNC connectors. The sync can be sync on green,
composite sync, separate sync (H & V) or 3 level sync.
11
Local Control Interface :
Input from the front control panel
only.
Fixed wire input not to be interchanged
.
12
Internal Loud speakers :
Connection for the internal loud
speakers left and right side.
Fixed wire input not to be interchanged
.
13
RS232 IN
: To allow communication with external computer,
e.g. IBM PC or compatible, Macintosh ...
14
RS232 OUT
: Used to connect to next projector, RS232IN plug
(communication link for PC or MAC to the next projector).
15
Communication port
: allows communication with the 800
series peripherals.
16
CTRL
: remote input for hard wired remote control.
17
Audio Out
: 2 x Cinch (RCA) stereo audio output.
18
Audio select LED's
: lit up (next to each audio input) when
AUDIO IN A/B/C or AUDIO OUT are selected.
19
Audio In
: 3 audio inputs on 2 Cinch (RCA) connectors for
audio (L-R).
Audio 'B' is a fixed wire input not to be interchanged.
20
Lens Mounting
: Projected picture output.
21
IR Receiver
: IR receiving sensor.
03
IR-Acknowledged :
(green LED) IR signals are recognized.
IR-Received :
(red LED) IR signals are received without
knowing for which projector.
04
Diagnostics code :
a) source number
b) error code : a two digit error code
is displayed when there is a malfunction inside the projector.
05
IR receiver
: receiver for control signals transmitted from the
RCU.
06
Port 1 : Video input
(composite video) on BNC connector.
Allows a video tape recorder, video camera, color receiver /
monitor, etc. having a video line output to be connected to the
projector.
07
Port 2 : Video input
on Cinch (RCA) connector. Allows a
video tape recorder, video camera, color receiver/monitor, etc.
having a video line output to be connected to the projector.
Fixed wire
input not to be interchanged
.
08
Port 3 : S-Video
on 4-pin mini-DIN connector. Separate Y/
C (luma-chroma) signal inputs for higher quality playback of Super
VHS signals.
09
Port 4 : RGB H/C V input :
RGB analog input with standard
sync on 5 BNC connectors. The sync can be sync on green,
composite sync or separate sync (H & V.)
Fixed wire input not to be
interchanged
.
02
A/C Power input
: switchable between 120V A/C
and 230V A/C (refer to installation manual.)
