Service Mode
10-1
5975948 RETRODATA 2100 210198
10
Starting up the Service Mode
SERVICE MODE
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Starting up the Service Mode
Press the control disc forwards or backward to highlight Service
and then press
ENTER
.
Some items in the Service mode are password protected (when the
password function is active). Enter your password to continue. All
other password protected items are now also free available if you
stay in the adjustment mode.
The service menu is built-up in two parts which are connected
together with the 'more' item.
If the desired item is not in the list of the displayed menu, select more
with the control disc and press
ENTER
to display the other items in
the service menu.
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
ENTER
continues to the Service mode selection menu.
EXIT
returns to operational mode.
- Identification
- Change Password
- Change Projector Address
- Change Baudrate PC
- Reset Lamp Run Time
- Lamp Run Time History
- Preset Input Balance
- Change Language
- 75
W
Termination
- Dimming
- I²C Diagnosis
SERVICE
CHANGE LANGUAGE
75
Ω
TERMINATION
DIMMING
I
2
C DIAGNOSIS
MORE ...
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUN TIME HISTORY
PRESET INPUT BALANCE
MORE ...
Remark: The item 'DIMMING' in this menu can be replaced by 'LAMP
DRIVE MODE' depending on the used lamp.
DIMMING for lamps with order number R9829510 and
R9829740.
LAMP DRIVE MODE for lamp with order number R9829600
Select with
ê
or
é
then <ENTER>
