Connections
3-4
5976025 BARCOVISION 708 200499
Connecting a RGB Analog source with composite sync.
RGB analog input terminals with composite sync input or with
sync on green. The projector detects automatically where the
sync signal is located.
Always use an interface when a computer and local monitor
have to be connected to the projector. Examples of interfaces
which can be applied :
Universal analog interface
R9826100
RGB 120 MHz Analog Interface
R9826570 (230V)
Multifunctional Analog Interface Kit
R9828120 (230V)
(MAGIK)
R9828129 (120V)
VGA interface
R9828070 (230V)
R9828079 (120V)
MAC interface
R9828050 (230V)
R9828059 (120V)
RGBS or RGsB input selection
a. Press digit button 3 on the RCU or
b. With the local keypad :
(to gain access to the local keypad, see 'Local keypad' in chapter
'Location and function of controls'.)
1.
Press
ADJUST
key, the General access menu is displayed
on the screen.
2.
Use the cursor keys to highlight
3.
3.
Press
ENTER
to select the highlighted source.
Connecting a RGB Analog source with Tri-level sync.
RGB analog input terminals with Tri level sync input or with Tri-
level sync on green. The projector detects automatically where
the sync signal is located.
If a line doubler is built in :
the default position of this line doubler is ON (active), the video
input signal will be displayed as a non interlaced image (=
improved image stability).
To enable or to disable this line doubler function, enter the
adjustment mode and change the position of the ON/OFF
toggle switch (see Picture tuning in chapter 'Guided' adjust-
ment mode or 'Random access' adjustment mode).
COMM PORT
(800 peripherals) REMOTE
S
VIDEO
S-VIDEO
5
*
%
6
$1$/2*287
,1387
R
G(S)
B
R-Y
Y( S)
B -Y
RS232 OUT
RS232 IN
GENERAL ACCESS
Select with ,
or
then <ENTER>.
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
5 6
3 4
1 2
Enter ADJUST
COMM PORT
(800 peripherals) REMOTE
S
VIDEO
S-VIDEO
VCR HDTV player
Audio amplifier
R
G(S)
B
R- Y
Y(S )
B -Y
RS232 OUT
RS232 IN
