Random Access Adjustment Mode
6-12
5976025 BARCOVISION 708 200499
Convergence Adjustment
Convergence adjustments affect both the horizontal and vertical lines of the setup pattern. These
adjustments are performed on the red image while superimposed on the green image and then on
the blue image while superimposed on the green image.
Note : the green convergence adjustments can be added as an option. When these are available,
start always with 'green only'. This option will also be indicated on the convergence menu.
Highlight first 'Green only' when available by pushing the cursor keys up or down and press ENTER
to display the convergence adjustment menu.
The screen area is divided into 13 areas.
Select with or
then <ENTER>
<EXIT> to return.
CONVERGENCE
Select with or
then <ENTER>
<EXIT> to return.
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
9
8
5
4
1
2
3
6
10
12
7
11
13
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
CONVERGENCE
SEL : select area
using
arrow keys
ADJ : adjust area
using
arrow keys
Toggle between
SEL and ADJ
with <ENTER>
<ENTER> continue
<EXIT> to return
CONVERGE
ADJUSTMENT
70
Use the cursor keys to move the box to the desired zone and then
press
ENTER
to begin the convergence adjustment. Start the
convergence adjustment with zone one and continue as mentioned
in the diagram hereafter.
Use the cursor keys to make horizontal or vertical convergence
adjustments in the selected zone and then press
ENTER
to move the
box to another zone or
EXIT
to return to the Convergence menu.
ENTER
toggles the cursor keys between zone selection and
zone adjustment .
EXIT
returns to convergence menu
red image
green image
