BARCO 1
Projection Systems
QFD(1.27:1) Lens
R9840400
What has to be
done
This new lens has to be installed on a 6000 series projector
Necessary Tools
no tool necessary
Installing the
Lens
To install the lens, follow the next procedure or look into the owners manual :
1
2
3
4
5
6
7
8
9
1
1
2
2
2
2
2
Take the lens out of its packing material.
Open the lens cover of the projector.
Loosen the wing bolts (B) and flip the motor part (A) up.
Open both lens locks (C) by pulling them backwards.
Put the lens on the lens holder.
Fix the lens by closing both locks (C) until they are se-
cured.
Flip the motor part (A) downwards.
Tighten wing bolts (B).
Re-install the lens cover.
Step
Action
Image
To be continued on next page.
Warning !
Risk of personal injury. Instructions for lens installation must be followed thoroughly.
Lens
QGD(2.5:1)
Image 1
Image 2
