3. Replacement procedure in case of an iQ Projector
W
ARNING
:
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
technician.
3.2 Access to the lamp unit(s) in the iQ projector
3.2.1
Removing the back cover
Necessary tools
a flat screwdriver of 10 mm
Necessary parts
No parts.
W
ARNING
:
Risk of Electrical Shock: For replacement procedures power down the projector and unplug the
power cord from the wall outlet. Once the projector is cooled down and the power is off, continue with the
replacement procedure.
Removing the back cover
1. Turn with a screwdriver the cover lock screw A quarter turn counter clockwise. (image 3-3)
2. Remove the back cover.
Image 3-3
rear cover lock screw
Image 3-4
rear cover removed
Image 3-5
right view of the projector, rear cover removed
6
R5976375 LAMP KIT FOR IQ/SIM4 PROJECTORS 23/06/2004
