Controlling
6-3
5975618A RETRO BLOCK GRAPHICS 2100LC 280498
Sound Controls with Direct Access.
VOLUME
0
44
Volume Control
Volume control adjusts the volume.
Use the + button for a higher volume.
Use the - button for a lower volume.
Bass Control
Bass control adjusts the bass level (low tones).
Use the + button for more low tones.
Use the - button for less low tones.
Treble Control
Treble control adjusts the treble level (high tones).
Use the + button for more high tones.
Use the - button for less high tones.
Balance Control
The balance control adjust the sound level between the left and the
right speaker.
Use the + button for a higher sound level on the right speaker than
on the left one.
Use the - button for a higher sound level on the left speaker than on
the right one.
The Pause Key
When the Pause key is pressed, the image projection is stopped but
the projector remains with full power for immediate restart. The
sound is not interrupted.
To restart the image reproduction :
- press pause key,
- press exit key or
- select a source number.
The Mute Key
When the Mute key is pressed, the sound reproduction is stopped.
The image is still displayed.
To restart the sound reproduction, press the Mute key again.
When a sound control is pressed, a text box with a bar scale, icon
and function name of the control, e.g. 'volume...' appears on the
screen (only if text is ON). See example screen. The length of the
bar scale indicates the current memorized setting for this source. The
bar scale changes as the + or - buttons of the control are pressed.
The picture controls can only be adjusted with the RCU.
(Only valid with an external audio system connected to the audio
output)
