Random Access Adjustment Mode
8-7
5975618A RETRO BLOCK GRAPHICS 2100LC 240898
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
PICTURE TUNING
SYNC [SLOW]
STILL VIDEO [ON]
COLOR BALANCE
GAMMA
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
PICTURE TUNING
SYNC [SLOW]
STILL VIDEO [ON]
COLOR BALANCE
GAMMA
PICTURE TUNING
SYNC : SLOW
STILL VIDEO : ON
COLOR BALANCE
GAMMA
COLOR BALANCE
Fixed color balance
3200 6500 9300
Custom white balance
Select with
ê
,
é
,
ç
,
è
then <ENTER>
<EXIT> to return.
For custom adjust
red with
ê
or
é
blue with
ç
or
è
GAIN RED
0
2.5
PICTURE TUNING
SYNC [SLOW]
STILL VIDEO [ON]
COLOR BALANCE
GAMMA
Sync SLOW/FAST
Highlight sync by pushing the control disk up or down and press
ENTER
to toggle between SLOW and FAST.
Note : Sync is normally used in the SLOW position. The FAST position
is used to compensate for unsteady sync pulses from older video
playback equipment.
Still Video
This function is only used for stationary interlaced images.
Highlight Still Video by pushing the control disk up or down and press
ENTER to toggle between ON and OFF.
Still Video : ON : the displayed image contains less jitter and gives
a sharper image.
Still Video : OFF : for moving picture.
Color Balance
Highlight Color Balance by pushing the control disk up or down and
press
ENTER
to select the color balance selection menu.
The next choices are possible :
Fixed color balance :
- 3200 K (reddish)
- 6500 K (white)
- 9300 K (bluish)
Custom white balance.
Push the control disk up or down to select Fixed Color Balance or
Custom Color Balance.
If Fixed Color Balance is selected, use the control disk by pushing it
to the right or to the left to select one of the 3 prepogrammed color
temperatures.
When Custom Color Balance is selected, push the control disk up or
down to adjust red and push the control disk to the right or to the left
to adjust blue (range 0 to 2.5) in comparison with the green color
(value 1).
Gamma
With the gamma correction adjustment, it is possible to bring the
details in dark image parts more to the front (higher values) or to
reduce the importance of these details (lower values).
To change the gamma value, highlight Gamma by pushing the control
disk up or down and press
ENTER
.
GAMMA
0
7
