4. Web Management
W
ARNING
:
Do not power off the WiPG-1000 device while the
fi
rmware upgrade is in progress, otherwise your
WiPG-1000 device may crash and you will have to return the device to your vendor for repair.
WebSlides Setup
Click [WebSlides Setup] to set up the WebSlides function.
•
< Auto Refresh Interval >:
Choose “Manual Refresh”, “10,” “20,” “30,” “45,” “60,” or “90” seconds refresh interval.
•
< Access Password Control >:
Choose “Disable,” “Use the same password as Code,” or “Use the following Code.”
Image 4-15
wePresent Admin WebSlides Setup Screen
It is important to realize that all the WebSlides users consume wireless bandwidth. If there are more than 10
concurrent WebSlides users, it is recommended to connect WiPG-1000 to your company network via Ethernet,
or set up a wireless router to connect to WiPG-1000. Then, users should connect their devices to WiPG-1000
via their company network or a wireless router in order to secure the projection performance. The number
of concurrent WebSlides users should not exceed the recommended number shown on the WebSlides Setup
page (displayed as above) to avoid connection failure or poor projection performance.
Reboot System
Click [Reboot System], and you can restart the system.
R5906158 WEPRESENT WIPG-1000 31/01/2018
23
Summary of Contents for WePresent WiPG-1000
