10
4. Indicator and key function
This series of aircraft equipped with 2 sets of gear drive motor can handle 300 of
the printer has a button and a light indicator will display three colors, in the light
of different colors or press the button with the power switch, allowing the printer
to start a number of functions, such as: paper, printing machine to suspend
action, sensor, calibration label print printer initialization value, self testing, see
below introduction.
4.1
LED Indicator light
4.2 General button function
1.
Feed
When the printer is ready (LED blue fixed), click the buttons, label paper into
the front end of a paper label.
2.
Print job timeout
When the printer is in print, clicking on the button causes the printing to
pause. The power indicator light flashes blue. Just click the button to
print the job back to normal
4.3 Internal Adaper Boot
The printer has four boot functions can be used to set or test the printer
hardware. At the same time, press the button in the boot with the lights,
release the button you can start these functions.
Follow these steps to start the boot function
：
1. Power off printer.
2. Press and hold the button to open the printer power supply.
3. Release the button as shown in the following table, as shown in the
required function.
LED Indicator color
Explain
Blue (fixed)
Power start, printer on standby to print
Blue (flashing)
The printer is downloading data or the printer is paused
Purple
Printer is clearing data
Red (fixed)
Upper cover open
Red (flashing)
Print error, for example: the paper, cardboard or run out of
memory errors... Etc.
