~ 11 ~
that is to say, the file will be segmented more than 15/30 minutes at a dark environment.
e.
Auto standby: Select the auto standby time of 0, 2 minutes, 5 minutes or 10 minutes. In case of no any
mission and operation after selecting, the system will start timing and FOOLISH will turn off input and
output to enter the standby mode at the end of the time set. If there is any operation in timing, the system
will re-time. If the video recording or shutter is operated in the -15- standby process, FOOLISH will be
waked up. The default standby time is 5 minutes when selecting to restore the factory default;
f.
TV output format: NTSC or PAL; the video format outputted to TV can be selected. If the selected format
is changed, please unplug the AV cable and then reinsert it to update the parameters;
g.
Format: After confirming that all files recorded are not needed to be saved, all files can be removed by
formatting.
Note: lf there is no card inserted, the memory of the machine will be formatted; after inserting card, the system
will format the card inserted, but not format the memory of the machine.
h.
Factory default: The operation restores the parameter settings to factory default. After restoring, the system
will set the display mode of submenu of the "Menu" in English state. Press "M" key to enter the menu
selection, press "<" or ">" key to enter the menu "Setup", press "-" key to select the option "Language",
and then it can set in Chinese state. The system will set the time at 2011.01.01 after restoring factory default.
i.
Language: "English", "Simplified Chinese" or "Traditional Chinese" can be selected via left or right key.
j.
Light source frequency: Select the light source frequency 50Hz or 60Hz, depending on local grid frequency,
in order to avoid the screen flickering in preview mode or in video recording.
k.
Date/Time: Time can be adjusted and changed. It will be displayed on the bottom right corner of the video
file or photo file when recording or shooting;
Note: To press "M" key under the submenu may exit from it.
Operations
:
1.
Insert the Micro SD card.
2.
Turn the power switch to “ON” to turn on FOOLISH , and the red indicator will be lightened and FOOLISH
will enter preview mode.
Note:
a. In case of low battery power, you will find the battery icon “ ”and the message "Low Power" on the TFT
screen.
b. lf no Micro SD card is inserted, you will find the Micro SD card icon “ ”on the TFT screen.
3.
Video recording:
(1)
Manual recording:
Press "Record" key once in preview state, the system will start recording, the video recording duration will be
displayed on the bottom right of TFT display screen, the " Green Indicator of Video/Voice Recording" and the
frontal "Video Recording/Shooting Indicator (Red)" will twinkle slowly, and the recording duration on LCD
segment screen is displayed normally. The video recording process only responds to operations of zoom In
("+" key)/zoom out ("-" key) function; if press "Record" key again, the system will stop and save the current
