~ 9 ~
after fully charging. The charging duration is about 3.5h.
Note:
Before use, please check if there is enough battery power. In case of a low battery power, please charge
FOOLISH via the attached power supply or USB cable. The "Red Indicator of Working/Charging "will twinkle
slowly in charging and remain red with the battery icon “
”displayed on the TFT display screen after charging.
(2)
Format the micro SD memory
Format the Micro SD card Please select a high-speed Micro SD card only and format it on FOOLISH before
recording any video and voice or shooting any photo. If the Micro SD card has ever been used on other devices,
please format it on FOOLISH before any operation for normal usage.
Note:
Please confirm whether files in internal memory of FOOLISH and in Micro SD card are needed before operating ;
* Locked files of FOOLISH also can be formatted to remove;
(3)
Set the date/time
In preview mode, press " M" key to enter the menu interface, press “>”key to shift to the setup interface "
", press key “-“to select the menu "Date/Time", and then press "OK" key to enter the setup interface of
"Date/Time", (Note: To press "M" key can exit from the setup interface).
The yellow number indicates the current cursor position. To press " <" or ">" key can move the cursor and
select date or time, Press "OK" key to confirm, and this number will turn red and value of date or time can be
changed. Then press "OK" key again to finish; Finally, move the cursor to “
” key and press "OK" key to
confirm date or time changed.
Parameter Settings
In preview mode, press "M" key to enter the menu interface, press "<" or ">" key to move the cursor left and
right, and press "+" or"-" key to move the cursor up and down. After selecting the menu, press "OK" key to set
the selected menu and to press "M" key again can exit..
(1)
Setting of camera parameter:
a.
Video image resolution: Select 1080P,960P,720P, WVGA or QVGA;
(720P/960P mode do not contain the setup options of 1080P mode and 1080P modle have no the
QVGA mode)
b.
Bit Rate: the sampling rate in transforming image into digital signals at the time of video recording.
Clear image requires high bit rate and large file size at the same time.
Settings
