Multi-Sensor
Acoustic Guitar
Preamp
Operation Manual
To replace your battery, follow the pictorial sequence below:
After battery replacement, reverse the sequence to reset.
1. Grasp the release tabs and
pinch to release the
preamp from housing.
2. Raise the preamp fully from
the housing.
3. Rotate the preamp while main-
taining full extension.
4. Continue to rotate until the
preamp reaches verti-
cal orientation.
5. Push the preamp straight down
to lock for easy bat-
tery access.
6. The battery compartment can
now be accessed for
removal or insertion.
To install a secondary pickup, mount per the
manufacturer
’
s instructions then plug into the
AUX IN jack located on the preamp housing.
Select the high or low position of
the gain switch depending on the
transducer signal level.
AUX IN
Gain Switch
Barcus-Berry
®
PO Box 63366, N Charleston, SC 29419 USA
www.barcusberry.com
LIMITED WARRANTY
This Barcus-Berry® product is warranted for a period of one (1) year from the date of
purchase against defects in workmanship and parts. For complete warranty details
or more information on other Barcus-Berry
®
products, visit www.barcusberry.com.
