Manual 2100-760
Page
4 of 17
Model
For Use with
Following Units
CRVS-5A
T36H
T42H
T48H
T60H
T36S
T42S
T48S
T60S
INSTALLATION
Basic Installation
1. Unpack the ventilator assembly which includes the
integral ventilator with attached electrical harness
and miscellaneous hardware.
2. Remove and save the existing exterior blower
access and service access panels on the Bard wall
mount unit (see Figure 1).
FIGURE 1
Removal of Exterior Panels
Open and lock disconnect switch before
installing this accessory to prevent injury or
death due to electrical shock or contact with
moving parts. Turn thermostat to off.
!
WARNING
