Cool
ing
While the amplifier modules that drive the MicroMain26 are very efficient, the speaker still generates a
significant amount of heat that must be dissipated. This heat is transmitted to the air via convection from the
rear amplifier plate. In order to ensure proper airflow, a minimum of 3” (76mm) clearance should be
maintained between the speaker and any large obstructions like walls. An ambient room temperature below
30°C (85°F) should be maintained. Over-temperature may cause speaker to overheat and shut down.
9.0 Pedestal Attachment
Caution:
The pedestals should never be used to lift or sus-
pend the MM26.
Each MM26 is supplied with two pedestal legs. The pedes-
tals provide clearance for the down firing subwoofer while
the speaker stands in its normal horizontal orientation.
Stand the cabinet in the vertical orientation. Attached the
pedestal by positioning it over the mounting holes on the
bottom of the speaker cabinet. Insert the 5/16”-18 x 1.25”
cap head screws and tighten using the 3/16” hex key.
Do not over tighten!
Over tightening can strip out the
threaded cabinet inserts and/or damage the finish of the
cabinet. Such damage is not covered under warranty.
Summary of Contents for MicroMain26
Page 1: ...Owner s Manual...
Page 19: ...Dimensions inches mm...
