Barefoot MicroMain26, Owner'S Manual

A good way to ensure you do not over tighten the screws is to put the long end of the hex key into the 
screw and turn it using the short end.  Tighten the screws using no more force than you can apply to 
the short end of the hex key while holding it in the tips of your thumb and index finger.  The tops of the 
pedestals should pull snug against the cabinet.  Test the fit by pulling the base of the pedestals gently 
from side to side.   As long as the pedestals do not rock against the cabinets they are tight enough.  

Maintenance 

Exterior surfaces of this product may be cleaned using a non-abrasive lint-free cloth lightly damped 
with water. Disconnect the mains power cable when cleaning to avoid risk of electric shock. Do not use 
alcohol-based cleaners.   

Driver active surfaces such as diaphragms and surrounds may be cleaned using dry soft bristle brushes.   
Driver diaphragms are very delicate and easily damaged.   So, proceed with great care.   Clean new  
sable artist brushes or cosmetic brushes work well for this task.  Gently brush dust away from the    
surface starting at the center of the driver diaphragm and moving radially outward.  Avoid applying 
inward pressure to the driver diaphragm.     

Repairs, maintenance, or other servicing of this product when its interior compartment is exposed 
should only be performed under specific advice from Barefoot Sound by a qualified technician or by 
the Barefoot Service Center. There are no user-serviceable parts inside this product.