background image

Limited Warranty 

BAREFOOT SOUND warrants electronic components and 
cabinetry for a period of three (3) years against manu-
facturing defects, covering parts and labor for necessary 
repairs. Moving speaker components such as tweeters, 
midranges and woofers are warranted for a period of one 
(1) year against manufacturing defects.
Shipping fees incurred from returns for under-warranty 
service in the first 30-days will be paid by BAREFOOT 
SOUND. All shipping fees both to and from BAREFOOT 
SOUND following this 30-day period must be paid by 
the customer. All returns, both during and following the 
30-day period, must be affected via the Procedures for
Obtaining Warranty Service described below.
BAREFOOT SOUND makes no other warranty, either 
express or implied, including but not limited to implied 
warranties of merchantability, fitness for a particular 
purpose, or conformity to any representation or de-
scription, with respect to this product other than as set 
forth below. BAREFOOT SOUND makes no warranty or 

representation, either express or implied, with respect 
to any other manufacturer’s product or documentation, 
its quality, performance, merchantability, fitness for a 
particular purpose, or conformity to any representation 
or description. 
Except as provided below, BAREFOOT SOUND is not 
liable for any loss, cost, expense, inconvenience or 
damage that may result from use or inability to use 
the product. Under no circumstances shall BAREFOOT 
SOUND be liable for any loss, cost, expense, inconve-
nience or damage exceeding the purchase price of the 
product. 
The warranty and remedies set forth below are exclusive 
and in lieu of all others, oral or written, expressed or 
implied. No reseller, agent or employee is authorized 
to make any modification, extension or addition to this 
warranty. 

  

  LIMITED WARRANTY

The above Limited Warranty is subject to the 
following conditions: 
This warranty covers only normal use of the product. 
BAREFOOT SOUND shall not be liable under this 
warranty if any damage or defect results from (i) misuse, 
abuse, neglect, improper shipping or installation; (ii) 
disasters such as fire, flood, lightning or improper 
electric current; or (iii) repairs, service or alteration by 
anyone other than an authorized BAREFOOT SOUND 
representative; (iv) damages incurred through incorrect 
connection or handling, abnormal conditions, high 
humidity, deliberate abuse, power surges, water spills,  
or any other accidents. 

You must retain your bill of sale or other proof of 
purchase to receive warranty service. 
No warranty extension will be granted for any  
replacement part(s) furnished to the purchaser in 
fulfillment of this warranty. 
To return a defective product, please contact our  
Customer Service Department at 

service@barefoot-

sound.com

 for a Return Merchandise Authorization 

(RMA) number and follow the Return of Products 
Instructions below. The RMA is valid for 10 days from 
date of issuance. Returns will not be accepted without 
an RMA. 

Warranty Conditions

Summary of Contents for MicroMain26
























Reviews: